The work of an electrician is connected with stripping conductors, for which they use both improvised tools - a construction knife or pliers, and special pliers.
We recommend using a stripper to remove the insulation from the wires, since only it guarantees the accuracy and accuracy of the cut. The range of strippers is extensive, so we will try to understand the features of the most popular types.
What is a stripper for?
If you decide to install a power outlet, change equipment in an electrical panel or build up an electrical cable, you will need to strip the ends of the wires, that is, remove the insulation. This is exactly what the stipper is designed for - a hand tool resembling ordinary mites in shape.
Literally, "stripper" is translated from English as "puller", which pretty accurately determines its purpose.
Manufacturers compete in the production of a convenient and effective tool, so recently a lot of models have appeared that look like screwdrivers, scissors, wire cutters
Previously, they used knives to clean the braids, but it was extremely inconvenient to work with them, and the result was not always satisfactory: it was possible to damage the cores or reduce their diameter, which subsequently negatively affected the quality of the wiring.
The use of a stripper minimized the risk of damage to the wires, and the process itself began to take less time.
Any person who does not have the skills and experience can use special ticks, since in the process of removing insulation it is no longer necessary to control forces and make precise movements
The main advantage of a stripper over the same construction knife is the maximum protection of a single or stranded wire. Now there is no need to worry that the blade accidentally cuts the current-carrying wire - the tool is equipped with limiters in length and diameter.
A brief overview of the lineup
If we analyze the tool for removing insulation produced by various manufacturers, we can see that a certain division into any categories does not exist. All strippers belong to a manual wiring tool, but they can vary greatly in shape, size, function.
Household and industrial wire strippers are usually divided by degree of automation into 3 groups:
- mechanical, requiring additional configuration;
- semi-automatic, partially customizable;
- automatic, not requiring adjustment.
For the most part, these are peculiar pincers or nippers with insulated handles and two “lips” moving due to the hinge fastening them. On the "lips" are holes of various diameters or knives, with which the cable braid is removed.
There is no strict border between the categories, just as there is no single design of the mechanism for biting off insulation. Examples of popular species:
Image Gallery
Photo from
Automatic stripper for quick work
Semi-automatic stripper for stranded wires
Mechanical pliers for home use
Internet cable pliers
It is not possible to list all types - this is a huge assortment from a small device that fits in the palm of your hand to a compact machine that continuously works in production. But strippers remain popular, which are convenient to carry in a tool box, comfortable to hold in one hand and, if necessary, set up for cutting various types of cables.
But do not forget to take into account that in addition to universal models, there are many special mites - for fiber, Internet cable, power wires, copper cores, etc. However, for household chores it is better to purchase universal ones - inexpensive and multifunctional.
Tool Recommendations
Manufacturers in technical specifications usually do not write, whether it is mechanical or automatic. However, they indicate whether the main parameters are being adjusted, and also what section or diameter the tool is designed for.
Consider the main criteria that you need to rely on when choosing a manual stripper.
Criterion # 1 - maximum / minimum cable diameter
In order not to buy the tool "for all occasions", you need to determine in advance what type of wires you most often have to deal with. Perhaps this is a power cable, with which there is still a lot of work in connection with the repair or redevelopment of an apartment, or an 8-wire twisted pair cable for the Internet. Accordingly, we take into account the diameter of the wire.
Sample stripper designed for stripping wires of various diameters. Removing insulation begins with the selection of the desired socket - the parameters are indicated directly on the working part
The diameter scale indicated by the manufacturer for selection may be different, for example, from 0.13 mm to 90 mm. If you work only with home wiring, then it is reasonable to choose a stripper designed for a diameter of 1.5-2.5 mm. A professional tool usually has a wider range.
Criterion # 2 - the presence of replaceable knives
Usually a tool with monolithic sharpened “lips” is deprived of the possibility of replacing the cutting equipment, since the working part is the main mechanism. But more complex fixtures consist of a large number of parts that can be replaced if necessary.
If you constantly work with cables insulated with a rigid polymer braid, it makes sense to purchase pincers with interchangeable blades that become dull and chipped over time
Interchangeable knives look different: it can be a pair of blades with a mounting screw or a full-fledged cutting head, which is connected to the handles by a hinged mechanism.
You should be aware that for household use you do not need to purchase expensive equipment with interchangeable knives (which cost an average of 600-1000 rubles), it is easier to immediately buy new mites.
Criterion # 3 - adjusting the diameter and depth of cut
The ability to adjust is very important, since it is on it that the quality of the cut and the integrity of the bare veins depends. Many electricians refuse an automatic tool in favor of a mechanical one, since they do not trust the devices and are used to setting or choosing the necessary parameters on their own.
Sample of universal ticks. To expose the wires, special sockets are not needed - the tool automatically adjusts to the desired diameter, while it can strip 2 or more wires simultaneously
To adjust the depth in some types of strippers, a limiter is installed - a small plastic or metal part that fixes the wires in a certain position. The wire simply cannot be inserted further than the limiter, so the cut is carried out strictly according to the specified depth, for example, 10 mm.
Consider how the work with an adjustable tool. As a sample - the simplest nippers.
Image Gallery
Photo from
Stripping pliers
The process of cutting a plastic braid
Wire stripping
If maximum precision is required, purchase an automatic machine or give preference to a stripper for stripping with a set of holes for different diameters.
Criterion # 4 - Additional Features
Some strippers are multifunctional, that is, removal of polymer insulation is one of the purposes, perhaps the main one. For example, many pincers, even automatic ones, are often equipped with a small blade. It serves to cut the wire to the desired length before stripping it.
Universal twisted pair clamps have two working sockets marked as 8P and 6P - they are designed not only for stripping, but also for crimping network and telephone connectors
Some manufacturers went further and supplied the tool with volumetric handles, from which, if desired, you can get any devices - from scissors to a corkscrew. Of course, such a technical refinement is not necessary for a simple installer; experienced craftsmen love a simple but reliable tool.
And multifunctional devices, as you know, break much faster, and most of the built-in devices are most often not needed.
Criterion # 5 - Best Manufacturer
The release of wire stripping pliers is carried out both by well-known manufacturers and by numerous Chinese companies that do not particularly care about the quality of the products. Of course, branded products are stronger, more reliable and more accurate, and the point here is not the promotion of the brand, but the quality of production.
It is known that a German-made instrument undergoes rigorous testing. Durable hardened alloys are used to make the same mites, and the insulation is checked in special baths under voltage.
The stripper KNIPEX KN, designed to remove insulation from coaxial cables, is equipped with adjustable depth and diameter of the cut. Removes the outer braid, shield and inner sheath in one go. Cost - 1550 rubles
Safety when working with conductive wires is in the first place, therefore it is better to purchase an expensive tool with a manufacturer’s guarantee than to rely on the reliability of an inexpensive stripper “without clan and tribe”.
Popular and established brands: FIT, HAUPA, JTC, KING TONY, Knipex, SHTOK, TOPEX.
Of domestic products, almost all electricians are known to have KVT strippers, so they are universal, convenient, affordable and rarely fail
The cost of equipment for removing insulation depends on the brand and specifics. The average price of a good household tool is 600-1500 rubles. Keep in mind that cheap models attract only at a price, there can be no talk of a good cut quality or reliability of knives.
We also recommend that you read our other article, where we examined in detail various ways of stripping wires from insulation. More details - follow the link.
Overview of strippers tested on personal experience:
Detailed review of popular models:
Practical video review:
The choice of a tool for electrical work is a purely individual matter. However, there are criteria without the analysis of which buying a stripper is simply impossible: technical specifications, application features, ease of use.
The advice of acquaintances of electricians is also taken into account, but only on condition that they are experienced skilled craftsmen, and not amateurs, on the occasion of a pair of outlets.
If you have experience using a stripper in practice, please share advice with those who are just learning to use such a tool. Leave your comments, ask questions in the block below.