Even the most original lighting fixture needs power. To rationally use electricity and implement interesting lighting ideas, they often use a 2 or 3-key switch.
To implement such a solution, it is not necessary to call an electrician, you can figure out how to connect the chandelier to the two-key switch and try to do all the work yourself.
The idea of saving is attractive, but have you never done such a job and are afraid to make a number of mistakes? We will help you - in this article we will consider a detailed briefing on connecting the chandelier to a switch with two keys. In addition, we give step-by-step photos of the installation process, providing them with a detailed description. And for beginners, add visual videos demonstrating the connection of a chandelier.
Features of two-level light control
In one room the brightness of all 9-12 light bulbs is not always required. Sometimes you want to create a romantic atmosphere by turning on 2-3 shades of an exquisite chandelier. They will allow you to get a dim light, ideal for holding intimate conversations in the evening.
The subtlety of controlling the light bulbs of the lighting device depends on the switch - if you put a two-key, you can effectively distinguish the possibilities of the chandelier, forming 2 light groups. This technique allows you to create a deeper light composition, and two buttons allow you to control the amount of light according to your wishes.
In addition, the user also receives additional benefits in the form of savings:
- electricity when you turn on one small group of bulbs;
- resource of the lighting devices themselveshaving a rest a certain period of time;
- space on the wall - the double model of the circuit breaker takes up less space than two single ones.
And if you wish, you can do it yourself with a chandelier. To do this, you first have to choose the most suitable switch model from the variety offered by numerous manufacturers.
Image Gallery
Photo from
Remote control
Switch in one frame with sockets
A suitable two-key and its proper connection will simplify the control of light in the room. True, it will still be necessary to create optimal groups of light bulbs that make up the chandelier.
In this matter, everything will depend on the number of points emitting light, and the presence of additional lamps in the room. Yes, and the model plays an important role: if it is a multi-level product, then it is advisable to connect the lamps of the top floor of the chandelier to one of the keys, and all the remaining ones to the second.
Recently, in pursuit of creating an original atmosphere in the house, users choose retro-models that emphasize the sophistication and originality of the interior
Groups can be formed at will, but the total number of lamps of the device has to be taken into account - the more there are, the more variations can be created.
So, for a product with 12 light emitters, the following options will be relevant:
- 3+9;
- 4+8;
- 5+7;
- 6+6.
It makes no sense to connect less than 3 lamps for one key - the room will be quite dark. For communication or watching movies, 3-4 pcs are enough.
The last option with an equal distribution is not the most successful, because with 6 bulbs it is inconvenient to read, knit or embroider, and they use quite a lot of electricity.
Image Gallery
Photo from
Original shape with many luminous elements
Home-made lighting design
Step-by-step installation instructions
When the switch is purchased, and in a brand new chandelier it was possible to form 2 groups of bulbs, each of which will be controlled by its own key, you can proceed directly to the implementation of electrical work. It is important to pay due attention to personal safety.
Stage # 1 - preparation for installation
The first step is to deal with all the wires. And there can be a lot of them. In order not to get lost and not to confuse anything, you have to calmly consider them and determine which one is responsible for what. We wrote more about wire marking in this article.
You can start with the chandelier itself. She will leave wires from each cartridge and there may still be a central core. It all depends on the model.
If this product is a trusted manufacturer, which values its reputation and customers, then there will be instructions in the package. It is her recommendations that should be followed during the work on the connection.
Chinese chandeliers can have a separation of wires by color - brown and blue. The former are responsible for the phase, and the latter are zero
Lighting fixtures made by Chinese firms look no less attractive than chandeliers of famous brands. And their cost is much more attractive, which explains the popularity among consumers.
A significant drawback is the lack of instructions with the wiring diagram and labeling of wires. Often they can all be of the same color - you have to independently determine who corresponds to what.
Image Gallery
Photo from
Using a multimeter, you need to determine the affiliation of the wires. If you are going to use the device for the first time, then the instructions for it will come in handy
All zero wires coming out of each cartridge must be connected together. To do this, they are carefully twisted, removing insulation from the ends by 0.8-1 cm. After twisting, put on a PPE cap or WAGO terminal block
Then form the first group of bulbs, collecting the desired number of phase wires in one batch. They are also twisted and put on a terminal block or cap, similar to the zero group of cores
It remains to assemble a second group of wires, which will be controlled by the second switch button. They are treated the same way as the first group.
Definition of wires with a multimeter
All zero wires twist together
Twisted phase wires for the first group of lamps
The second group of phase wires
With self-assembly of all connection options, it is more convenient to use PPE caps and Vago terminal blocks when connecting the chandelier.
For proper installation of the chandelier, it’s irrational to learn the basics of soldering or rent equipment to perform high-quality crimping. PPE caps do an excellent job of isolating contacts, ensuring a reliable connection
Other methods of connecting wires are relevant for professional electricians who have the necessary tools and skills for such work.
It is also necessary to determine the accessory of wires coming from the switch. They can stick out right from the ceiling. Or they will have to be freed by removing the old chandelier.
In any case, before carrying out work, it is important to disconnect the line to protect itself from electric shock.
After removing the old light fixture and freeing the wires, they will have to be carefully examined for damage to the insulation. If it is not broken, then you need to separate them in different directions and turn on the power to check with an indicator screwdriver or multimeter the accessory of each of the cores.
From the ceiling can go 3 or 4 wires. In the first case there will be 1 zero and 2 phase, and in the second one another will be added - grounding. It is used to ground the chandelier body
Now you need to turn off the power to the line to carry out further work.
Stage # 2 - checking the correct connection of the switch
It is important, even before mounting the chandelier, to see if the operating mechanism of the switch with two keys is connected correctly.
To do this, remove the front panel with the keys and get the main part, to which the wires are attached.
Depending on the model and manufacturer, the two-key can have a variety of designations on the back that indicate the purpose of the contacts. If there is an instruction, it will be easier to understand, and in its absence, you need to carefully study the numbers or letters printed on the back.
A product with two keys has one input contact for a phase and two output contacts. They are denoted by the letters L, L1 and L2, respectively. The contacts of the outgoing phase can be called one digits - 1 and 2
When installing the double switch yourself, it is important to connect the wires correctly. If it is already standing, you need not be too lazy and unwind it in order to assess the adequacy of its connection.
Having reached the working mechanism, it is necessary to inspect the insulation, check the correct connection of the cores so that the power supply from the shield is in contact with the letter L. And you should also pay attention so that it does not fall out of its connector and does not hang out.
The operating mechanism of the switch, the wires and connections must be neat, the insulation in the right place. It is important that all conductors are separated and carefully laid in the socket, if it was used for wiring.
Stage # 3 - Providing Power to the Wires
After checking the wires coming from the two-gang switch to the chandelier, you can continue to connect it. In principle, according to the color of the wires emerging from the working mechanism, it is clear which wires stick out from the ceiling.
They are to be connected with nodes formed from the veins emerging from the horns of the lighting device.
The scheme by which the chandelier is connected to a switch with two keys. It’s important not to mix wires
To do this correctly, you need to calmly make the connections, well stripping the insulation.
Image Gallery
Photo from
Many home craftsmen who have no experience soldering wires and the appropriate tool, prefer to use WAGO terminal blocks to ensure reliable connection. The figure shows the position of the presser foot: squeezed (left) and squeezed (right)
If the chandelier still has a common wire, consisting of 3 cores, then it is necessary to add the corresponding wires to the twist of each group, and then isolate them by inserting it into the terminal block
It is necessary to insert into the free Vago connectors the corresponding strands of cores extending from the cartridges. They will be connected to the outgoing contacts of the circuit breaker. These are L1 and L2, which in the future will be controlled by each of the keys
It remains to connect the phase from each of the keys to the groups that they will control. Zero is also connected to zero Vago by inserting it into a free terminal block connector
Vago terminal block for reliable wire connection
Preparation of strands of wires to connect
Twists of each of the groups of bulbs to be placed in the Vago terminal block
Connecting the outgoing phases of the switch to the wire groups of the chandelier
All work is preferably carried out with protective gloves. Even a beginner can use WAGO or PPE caps. Moreover, the installation will have to be done under the ceiling, which is not very convenient.
When all the connections are made, you need to carefully place the wires, laying them inside the decorative lining of the lighting device.
It remains to attach the chandelier based on the characteristics of the model - hang it on a hook or fix it to the bracket.
After screwing in the bulbs, you can test the performance of the product and the functionality of each of the switch keys. If everything is done correctly, the device will properly control two groups of bulbs
More wiring diagrams and connection rules we examined in detail in our other article.
Common Connection Errors
With independent wiring, you often have to deal with issues that arise due to errors made during the connection process.
A common problem is a broken or malfunctioning chandelier, which should be controlled by a two-key.
The first sign of an incorrect connection is the lack of backlight on the device. This is true for backlit models. Therefore, we have to disassemble the mechanism and see where the error crept in.
The first thing you should pay attention to is zero. He never comes to the switch - he goes directly from the junction box to the ceiling. If this is not so, then you need to correct the mistake by letting zero out of the box to the chandelier, bypassing the two-button.
The second error associated with the neutral wire when it was connected to one of the phase connectors. We recall the rule that zero immediately goes to the lighting device and is removed from the phase contact.
The third error - the incoming phase conductor is connected to the outgoing left or right contact in the working mechanism. Simply put, the connectors were mixed up during the connection process. This is not difficult to fix - you need to unscrew the connections and insert the wires correctly, re-securing them.
In addition to these errors, the following are often found:
- poorly made connections - the wire hangs, not providing proper contact;
- the wires are simply twisted together and wrapped with electrical tape on top - simple twisting is prohibited, you should put on a cap or insert them into Vago;
- core insulation is damaged;
- when making connections, the insulation was poorly removed, which prevented a tight contact of the wires.
All problems can be avoided if you immediately perform each of the processes calmly and not be too lazy to double-check the quality of work.
It should be noted that the power cable to the chandelier from the switch does not always pass through the distribution box. Options, when the phase goes immediately, bypassing it, are now gaining momentum.
In such cases, to hide all the connections and wires, you can put an additional socket on which to put a plug, though not all manufacturers have such a design.
The plug allows you to hide the wires and their connections in the spare socket box. And if necessary, access to them will be as simple as possible - removed the plug and do a wiring inspection
When conducting an independent installation of the chandelier by a novice electrician, minor problems may arise. About this in more detail in the video:
Detailed instruction on the use of the multimeter in the video:
Connection and functional check of a chandelier controlled by a two-gang switch:
Having dealt with the intricacies of electrical work when connecting the chandelier, you can do it yourself.
Why do you have to comply with electrical safety rules and correctly connect all wires, after dividing the light bulbs of the lighting device into 2 groups, each of which will be controlled by one of the switch keys.
Have experience successfully connecting a lighting fixture to a dual switch and want to share it with other users? Or maybe you made a mistake during installation, then successfully fixed it and now want to warn other home masters who have no experience in performing electrical work about this? Write your advice and comments, ask questions in the comments section below this article.