The strength of the water stream is a renewable natural resource that allows you to receive almost free electricity. The energy donated by nature will provide an opportunity to save on utilities and solve the problem of recharging equipment.
If a stream or river flows near your home, they are worth using. They will be able to provide electricity to the plot and the house. And even if a do-it-yourself hydroelectric power station is built, the economic effect increases significantly.
The presented article describes in detail the manufacturing technology of private hydraulic structures. We talked about what is required to set up a system and connect it to consumers. Here you will learn about all the options for miniature energy suppliers, assembled from improvised materials.
Hydroelectric Power Plants
Hydroelectric power plants are structures capable of converting the energy of water movement into electricity. Alternative “green” electricity suppliers are still actively exploited only in the West. On the territory of our country, this promising industry is only taking its first timid steps.
Image Gallery
Photo from
Generating electricity by extracting the potential of water is one of the promising areas of green energy. Its advantages are the use of inexhaustible free resources of the planet with the least damage to the natural environment.
The objects involved in the field of small hydropower include mini hydroelectric power plants generating from 3-100 kW to 25 MW
To obtain electricity when using the energy of water, it is not necessary to have a turbulent mountain river or to build a large dam. It’s enough to narrow the bed of a small river or stream
The turbine of a small hydroelectric power station can be forced to rotate even a relatively small channel in volume, into which water comes from a nearby reservoir or river
Small hydropower plants located directly in the water stream are simple, but they do not allow regulating the strength and volume of runoff. Possibility of adjustment will provide a miniature reservoir
The most promising for the organization of mini hydroelectric power stations are mountain streams with a characteristic height difference in the channel. However, similar conditions can also be created for a river flowing along flat terrain.
All kinds of water turns and swirls that can be built artificially by pouring concrete structures will help to increase the performance of a miniature hydroelectric power station.
To increase the efficiency, small hydropower developers are improving turbines. For example, a conventional wheel with blades is replaced by a multi-turn screw
Using water to generate electricity
One of the traditional options for small hydropower
Channel narrowing for energy recovery
Blade-directed device
Near-dam option with a small reservoir
The difference in height in the channel of a stream or river
Artificially constructed twist
High efficiency screw type turbine
Small private hydropower plants can be dams on large rivers, generating from a dozen to several hundred megawatts or mini-hydroelectric power stations with a maximum power of 100 kW, which is enough for the needs of a private house. Here about the latter and learn more.
Hydraulic screw station
The design consists of a chain of rotors mounted on a flexible steel cable, pulled across the river. The cable itself plays the role of a rotational shaft, one end of which is fixed on the support bearing, and the other activates the generator shaft.
Each “garland” hydraulic rotor is capable of generating about 2 kW of energy, however, the water flow rate for this should be at least 2.5 meters per second, and the depth of the reservoir should not exceed 1.5 m.
The principle of operation of a garland hydroelectric power station is simple: the pressure of the water spins the hydraulic screws, and they rotate the cable and force the generator to generate energy
Garland stations were successfully used back in the middle of the last century, but then the role of screws was played by homemade propellers and even tin cans. Today, manufacturers offer several types of rotors for various operating conditions.
They are equipped with blades of different sizes made of sheet metal, and allow to obtain maximum efficiency from the operation of the station.
But although this hydrogenerator is quite simple to manufacture, its operation involves a number of special conditions that are not always feasible in real life. Such structures block the riverbed, and it is unlikely that neighbors along the coast, not to mention representatives of environmental services, will allow the use of flow energy for your purposes.
In addition, in winter, the unit can only be used in non-freezing water bodies, and in harsh climates it can be preserved or dismantled. Therefore, garland stations are built temporarily and mainly in a deserted area (for example, near summer pastures).
Rotor stations with a capacity of 1 to 15 kW / h generate up to 9.3 MW per month and allow you to independently solve the problem of electrification in regions remote from centralized highways
A modern analogue of a daisy-chain installation is submersible or tidal frame stations with transverse rotors. Unlike their garland predecessor, these structures do not block the entire river, but only use part of the channel, and they can be installed on a pontoon / raft or completely lowered to the bottom of the reservoir.
Vertical rotor Daria
The Darier rotor is a turbine device, which was named in honor of its inventor in 1931. The system consists of several aerodynamic blades fixed on radial beams and operates due to the differential pressure according to the “lift wing” principle, which is widely used in shipbuilding and aviation.
Although these plants are more used to create wind generators, they can work with water. But in this case, accurate calculations are needed to select the thickness and width of the blades in accordance with the strength of the water flow.
The Darier rotor resembles a “windmill”, only installed under water, and it can work regardless of seasonal fluctuations in flow rate
Vertical rotors are rarely used to create local hydropower plants. Despite the good performance indicators and the apparent simplicity of the design, the equipment is quite difficult to operate.
Before starting work, the system needs to be "untwisted", but only the freezing of a reservoir can stop a running station. Therefore, the Darier rotor is used mainly in industrial enterprises.
An interesting solution in the field of designing small hydropower plants with a vertically operating turbine was proposed by the Austrian inventor Franz Zotloterer:
Image Gallery
Photo from
Mini-station of whirlpool-gravitational action
The construction of a separate channel with a whirlpool
Turbine in the center of rotation
Generated Energy Collectors
The weighty advantage of the whirlpool is rightly considered the conservation of fish resources. The operation of a vertical turbine does not harm living organisms of the river. In addition, mud does not linger on the walls of structures due to the specific movement of the water flow.
Underwater propeller
In fact, this is the simplest wind turbine, it is only installed under water. The dimensions of the blades to ensure maximum rotation speed and minimum resistance are calculated depending on the strength of the flow. For example, if the flow velocity does not exceed 2 m / s, then the width of the blade should be within 2-3 cm.
An underwater propeller is easy to make with your own hands, but it is only suitable for deep and fast rivers - in a shallow pond, rotating blades can cause injury to fishermen, swimmers, waterfowl and animals
Such a windmill is installed "towards" the flow, but its blades do not work due to the pressure of the water pressure, but due to the occurrence of lifting force (by the principle of an airplane wing or ship propeller).
Water wheel with blades
A water wheel is one of the simplest versions of a hydraulic motor, known since the time of the Roman Empire. The effectiveness of its work largely depends on the type of source on which it was installed.
The casting wheel can only rotate due to the flow rate, and the casting wheel can be rotated with the help of the pressure and the weight of water flowing from above onto the blades
Depending on the depth and channel of the watercourse, various types of wheels can be installed:
- Submarine (or inferior) - Suitable for shallow rivers with a fast flow.
- Midbottom - are located in channels with natural cascades so that the stream flows approximately in the middle of the rotating drum.
- Bulk (or high-piling) - are installed under the dam, pipe or at the bottom of the natural threshold, so that the falling water continues through the top of the wheel.
But the principle of operation for all options is one and the same: water enters the blades and drives a wheel, which makes the generator for the mini-power plant rotate.
Hydraulic equipment manufacturers offer off-the-shelf turbines whose blades are specially adapted for a specific water flow rate. But home craftsmen make drum constructions in the old fashioned way - from improvised materials.
The following photo selection will help you get acquainted with the steps of building the simplest version of a mini hydroelectric station:
Image Gallery
Photo from
Step 1: Narrowing the channel and forming a delta
Step 2: Cutting parts for turbine assembly
Step 3: Fixing the blades in a makeshift turbine
Step 5: Installing the support in the stream channel
Step 5: Installing the turbine on a support structure
Step 6: Connecting the Generator and Batteries
Step 7: Belt Drive
Step 8: Testing the device after assembly
Perhaps the lack of optimization will affect the efficiency indicators, but the cost of home-made equipment will cost several times cheaper than the purchased counterpart. Therefore, a water wheel is the most popular option for organizing your own mini-hydroelectric power station.
Conditions for the installation of a hydroelectric power station
Despite the tempting cheapness of energy generated by a hydrogenerator, it is important to consider the features of a water source, the resources of which you plan to use for your own needs.
Indeed, not every watercourse is suitable for operation of a mini-hydroelectric power station, especially year-round, so it will not hurt to have the ability to connect to a centralized highway in reserve.
A few pros and cons
The main advantages of an individual hydroelectric power station are obvious: inexpensive equipment that generates cheap electricity does not harm nature (unlike dams that block the river current). Although the system cannot be called absolutely safe, still rotating elements of turbines can cause injuries to the inhabitants of the underwater world and even to people.
In order to prevent accidents, the hydroelectric power station must be protected, and if the system is completely hidden by water - install a warning sign on the shore
Advantages of mini-hydro:
- Unlike other “free” energy sources (solar panels, wind generators), hydraulic systems can work regardless of the time of day or weather. The only thing that can prevent them is the freezing of the reservoir.
- It is not necessary to have a large river to install a hydrogenerator - the same water wheels can be successfully used even in small (but fast!) Streams.
- Installations do not emit harmful substances, do not pollute water and work almost silently.
- For the installation of mini-hydroelectric power plants with a capacity of up to 100 kW, it is not necessary to draw up permits (although it all depends on local authorities and the type of installation).
- Excess electricity can be sold to neighboring houses.
As for the shortcomings, a lack of flow can become a serious obstacle to the productive operation of the equipment. In this case, it will be necessary to erect auxiliary structures, which entails additional costs.
If the potential energy of a nearby river is not enough for the generation of electricity in an amount sufficient for practical use, it is worth paying attention to the methods of constructing wind generators. The windmill will serve as an effective complement.
Water Flow Measurement
The first thing you need to do to think about the form and method of installation of the station is to measure the speed of the water flow at a chosen source.
The easiest way is to lower any lightweight object (for example, a tennis ball, a piece of polystyrene foam or a fishing float) onto the rapids and stop the time with which the swimmer will swim the distance to some landmark. The standard distance for the "swim" is 10 meters.
If the pond is far from home, you can build a branch channel or pipeline, and at the same time take care of the height differences
Now you need to divide the distance traveled in meters by the number of seconds - this will be the speed of the current. But if the obtained value is less than 1 m / s, it will be necessary to erect artificial structures in order to accelerate the flow by elevation differences.
This can be done using a collapsible dam or a narrow drain pipe. But without a good flow, the idea of a hydroelectric station will have to be abandoned.
Production of hydropower plants based on a water wheel
Of course, assembling “on one knee” and erecting a colossus designed to serve an enterprise or settlement even from a dozen houses is an idea from the realm of fantasy. But to build a mini-hydroelectric station with your own hands to save electricity is quite real. Moreover, you can use both finished components and improvised materials.
Therefore, we consider step-by-step manufacturing of the simplest structure - a water wheel.
Necessary materials and tools
To make a mini-hydroelectric station with your own hands, you need to prepare a welding machine, a grinder, a drill and a set of auxiliary tools - a hammer, a screwdriver, a ruler.
From the materials you will need:
- Corners and sheet metal with a thickness of at least 5 mm.
- Pipes made of PVC or galvanized steel for the manufacture of blades.
- Generator (you can use a ready-made one or make it yourself, as in this example).
- Brake discs.
- Shaft and bearings.
- Plywood.
- Polystyrene resin for filling the rotor and stator.
- 15 mm copper wire for a makeshift generator.
- Neodymium magnets.
Please note that the wheel design will constantly come into contact with water, therefore metal and wooden elements must be selected with protection from moisture (or take care of their impregnation and painting yourself). Ideally, plywood can be replaced with plastic, but wooden parts are easier to get and shape.
Wheel assembly and nozzle manufacturing
The basis for the wheel itself can be two steel disks of the same diameter (if it is possible to get a steel drum from the cable - excellent, this will greatly speed up the assembly process).
But if metal was not found in the materials at hand, it is possible to cut circles from waterproof plywood, although the strength and durability of even treated wood can not be compared with steel. Then on one of the disks you need to cut a round hole for installing the generator.
After that, the blades are made, and they will need at least 16 pcs. For this, galvanized pipes are cut lengthwise into two or four parts (depending on the diameter).Then, the cutting sites and the surface of the blades themselves must be sanded to reduce energy losses during friction.
The blades are installed at an angle of about 40-45 degrees - this will help to increase the surface area, which will be affected by the flow force
The distance between the two side discs should be as close as possible to the length of the blades. In order to outline a place for the location of future hubs, it is recommended to make a template from plywood, on which a place for each part and a hole for fixing the wheel to the generator will be indicated. Ready marking can be attached on the outside of one of the drives.
Then the circles are installed parallel to each other using solid-threaded rods, and the blades are welded or fixed with bolts in the desired positions. The drum will rotate on bearings, and a frame of corners or pipes of small diameter is used as a support.
At this stage, the drum assembly can be considered complete, it remains to equip it with a home-made generator and a nozzle directing the flow of water
The nozzle is designed for cascade type water sources - such a setup will allow the maximum flow energy to be used. This auxiliary element is made by bending sheet metal with subsequent welding of the seams, and then it is mounted on the pipe.
However, if a flat river flows in your area without rapids and other high-altitude obstacles, this detail is not necessary.
It is important that the width of the nozzle exit hole corresponds to the width of the wheel itself, otherwise part of the flow will go idle without falling onto the blades
Now the wheel needs to be mounted on the axle and mounted on a support from the corners welded or bolted together. It remains to make a generator (or install it ready) and you can go to the river.
DIY generator
To make a homemade generator, you need to make a stator winding and fill, for which you need coils with 125 turns of copper wire on each. After joining them, the entire structure is poured with polyester resin.
Each phase consists of three consecutively attached coils, so the connection can be made in the form of a star or a triangle with several external leads
Now you need to prepare a plywood template that matches the size of the brake disc.
Markings are made on a wooden ring and slots are made for installing magnets (in this case, neodymium magnets 1.3 cm thick, 2.5 cm wide and 5 cm long were used). Then the resulting rotor is also filled with resin, and after drying it is attached to the wheel drum.
Water wheel with brake disc rotor and copper wire coil generator - painted, presentable and ready for use
The last mounted aluminum casing with an ammeter, covering the rectifiers. The task of these elements is to convert three-phase current into direct current.
After installing the wheel in the stream of a small river with a cascade or bypass pipe, you can count on the performance of a mini-hydroelectric power station at 1.9A * 12V at 110 revolutions per minute
To prevent leaves, sand and other debris brought with the stream from falling into the wheel, it is advisable to put a protective net in front of the device.
You can also experiment with gaps between magnets and coils with an increased number of turns to increase the efficiency of the hydroelectric station.
You will learn about all types of alternative energy sources by reading the article on the introduction of “green technologies” in everyday life.
Video # 1. An example of a working hydraulic installation with a self-made generator based on a three-phase engine:
Video # 2. Water-powered mini hydropower plant:
Video # 3. A station based on a bicycle wheel is an interesting solution to the problem of energy supply on vacation far from civilization:
As you can see, building a water mini-power plant with your own hands is not so difficult. But since most of the calculations and parameters for its components are determined “by eye”, one should be prepared for possible breakdowns and associated costs.
If you feel a lack of knowledge and experience in this field, you should trust the specialists who will perform all the necessary calculations, advise the equipment that is optimal for your case and perform its installation in high quality.
Please write comments in the block below. Share interesting information and useful recommendations, leave thematic photos. Perhaps you want to tell how you built your own hydroelectric power station on a suburban site? We will be glad to read your story about the process of the device and operation.