You have a need to install a special outlet for connecting to the Internet, but do not want to call the wizard? Agree that independent installation will save money, and you will be sure of the quality of the work performed.
But you do not know how to connect an Internet outlet and what will be required for this? We will tell you where to start - this article will explain in detail to the home foreman and civil engineer the features of the connection, as well as give comprehensive answers to all related questions.
Visual photos and useful videos will help you understand the installation process and tell you what you need to focus on when connecting RJ-45 socket connectors.
The need to install an outlet
Most of us live in multi-room apartments and private houses. For each separate room of such dwellings, it is necessary to solve one small but rather “insidious” problem: in any available way, create a “point” for connecting to the Internet devices of different types of connection.
It would seem that the answer is obvious - to buy and install a Wi-Fi router and there are no problems. But here are some people, to put it mildly, not enthusiastic about the negative influence of electromagnetic waves from medium- and low-power generators on their own health, the health of their loved ones and especially young children.
When choosing an Internet outlet, you need to remember that a single or double will be enough for a living room. And for the office it is worth thinking about modular sockets
Therefore, it is worth thinking about reducing the electromagnetic “smog” in our homes and apartments.
One of such methods is installation with the connection of Internet outlets directly in the walls of the room.
Installing outlets for connecting to the Internet is carried out according to the rules common to all wiring accessories. By analogy, they are released for hidden and open wiring.
You need to understand that this is only one of the options for providing multi-point Internet access for laptops, stationary computers, mini-servers and personal data storages in the house / apartment / office.
The process of connecting the outlet with your own hands is shown in the form of step-by-step photo instructions below.
Image Gallery
Photo from
Preparing a socket for an Internet outlet
Preparing the outlet mechanism for installation
Threading the Internet cable into the mechanism
Preparing an Internet cable for connection
Installation of twisted pair cores according to scheme B
Installation of the assembled part of the mechanism
Installing the outlet mechanism in the socket
Frame and front panel mount
Options for using Internet outlets
In addition to “home” use projects, there are still a sufficient number of options.
In which the installation of such outlets under the Internet will be not only relevant, but sometimes simply an original way out of a special, demanding security situation, taking into account the technical conditions for providing Internet access.
Depending on the type and purpose of the building, technical requirements are put forward for the arrangement of apartments in such buildings.
There are several main categories of such premises:
- Offices, classrooms and server rooms
- Internet clubs and digital libraries;
- IT shops and workshops for the maintenance of computer equipment;
- facilities with increased penetration protection.
For most offices and audiences, in addition to the availability of wireless Internet access points, it is mandatory to equip the walls and office furniture with RJ-45 sockets, which provide the connection of the “work” computer stations to the Internet, as well as to local networks.
None of the server-type premises can do without the presence of twisted pair connectors in / on the walls. This is a mandatory requirement for every IT engineer who has taken up the construction of a “server” or data warehouse.
The construct is an ideal way to provide in a limited space the entire list of necessary interfaces for connecting a laptop, phone, printer, etc.
The rapid development of technology affects all aspects of our lives and, in particular, education.
Now it’s very “hard” to imagine an educational institution of any level, from school to university, without the presence of auxiliary search tools (computers). They search and provide the necessary information in a huge “knowledge bank” - an electronic library.
If you are a private entrepreneur or business owner, which is associated with the sale and / or repair of computer and office equipment, then the presence of outlet designs is simply “vital” for the normal working conditions of your employees.
And another example of the mandatory equipment of Internet outlets and constructs - premises for corporate and state security services.
As well as bank and other storages, with increased protection against penetration, where virtually any significant electromagnetic radiation is prohibited or interception of packet information through wireless data transmission is possible.
Types and types of Internet outlets
In order to understand what type of sockets we need to use in a particular case, we need to understand the general classification of sockets under the RJ-45 connector.
But before, the RJ-45 is a unified standard for physically connecting computers and network switches using a standard 8-core shielded wire, often called a “twisted pair” cable.
Because by making the cross section of the cable, you can easily see 4 intertwined pairs of wires. With this type of wire, the vast majority of information transmission channels in local and public networks are built.
You may also be interested in information about the types of cable for the Internet and recommendations for selection.
On the basis of the RJ-45 interface, countless local and corporate networks have been built, as well as the wired part of the Internet. This is a generally accepted standard for data transmission over a network.
Specialists suggest the following classification of outlets:
- By the number of connectors. Distinguish single, double and terminal sockets with 4-8 connectors. In addition, there is still a separate type of combined outlets. Such modules may contain additional types of interfaces, including audio, USB, HDMI, and RJ-45 itself.
- By data rate. There are many varieties and categories, the most important of which is category 3 - data transfer rates up to 100 Mbit / s, category 5e - up to 1000 Mbit / s and category 6 - up to 10 Gbit / s over a distance of 55 meters.
- According to the principle of fastening. By analogy with power wiring products, there are internal and overhead computer sockets. At the internal outlet, the mechanism (the contact group of the clamps) is deepened into the wall, and externally laid along the wall surface.
For an outlet hidden, laid in the wall of the wiring, it is necessary to have a protective plastic “glass” in the wall, where the terminal block is attached. An external outlet is usually mounted using a patch panel on the wall surface.
Image Gallery
Photo from
The standard mechanism of the Internet outlet Legrand
Option outlet for connecting to the Internet
Connecting a modular type of Internet outlet
Internet socket with modular pads for twisted pair
As for the manufacturers: there are many, domestic and foreign. Recently, “Chinese” network equipment companies have begun to “level off” in terms of finished product quality relative to the rest.
Uniquely high quality differs products from such global brands as Digitus, Legrand, VIKO, etc.
Separately, it is worth mentioning the “keystones” - keystones.
A feature of keystones is that using them you can provide almost every computer with any set of interfaces. Recently, HDMI keystones are gaining widespread
This is a modular architecture for placing individual “stones” - modular connectors for a wide variety of audio, video, telephone, optical, Mini-DIN and other interfaces, including RJ-45 on one standard panel of the socket block.
This is a fairly flexible and scalable system for providing interfaces to the end user.
Laying “twisted pair” on / on the walls
We pass from theory to practice. If we are talking about laying cables and wires in a new building, then no special issues should arise: we put twisted pair next to the rest of the communications, usually in corrugated tubes, and their holes in the cut-out hollows.
Be sure to remember the number of wires inserted into the channel and their average diameter, and also take into account the channel diameter + 25% of the total sum of all cable diameters.
Another thing is if we make repairs in an existing building and re-create the channels. It is necessary to take into account the material of which the walls are made: frame gypsum panels, brick, concrete, etc.
The hardest thing is to make the channels in concrete / brick without damaging the rest of the communications.
To detect wiring in the walls, you can use any available building electromagnetic wiring detectors.
If there is no way to remove the furniture from the room, then it is recommended to cover it with protective construction film. Its thickness is not more than 1 mm, and the amount is calculated by the formula: (room height * room perimeter) + 10%
It should be noted that there will be a lot of dust if you work in concrete. As a result of gating with abrasive dust and small pebbles everything that is in the room will be covered: walls, ceiling, floor, furniture, equipment.
Therefore, you must initially free the room or cover everything with plastic wrap.
We strongly recommend that the master wear the following set:
- tight jumpsuit (jacket / pants);
- headdress (you can have a swimming cap, bandana);
- glasses (we recommend skiing or others with protection of the temporal areas of the face);
- thin and comfortable gloves, boots, personal protective equipment for the respiratory tract (face masks, respirators, dressings, etc.).
For gating (forming channels in foam concrete or brick walls), you need to use the following tools: grommets, wall chasers, groove cutters.
As an option, it is still possible to use powerful “grinders” with cutting discs (with diamond spraying). The cutting depth of the channel should be 30-35 mm, width up to 25 mm exclusively for one or more twisted-pair wires.
Absolutely all channels and gutters must be done at right angles - this is an obligatory rule of any building repair.
To reduce the time for installing outlets and reduce labor costs, you can use plastic mounting boxes - cable channels
As for the cavities for sockets, they are made using a jumper, an electric hammer or a drill / perforator with a nozzle for a socket outlet.
But initially, you need to determine the approximate placement of Internet outlets in the premises. As a rule, holes for RJ45 sockets are drilled at a height of 1000-1200 mm from the floor or 150-300 mm.
For residential premises, one or two outlets on opposite walls of the room are enough. For offices, they usually put one outlet near the future workplace.
In server rooms and rooms with similar functions, a different strategy is to make 3-4 holes for modular socket blocks, two blocks on one wall and one on all other walls.
And the last thing you need to pay attention to in terms of laying wires - sometimes it is possible to lay communications under the floor or in the ceiling of the room.
In such a situation, the question of gating walls does not arise, it is enough to bring the wire under the floor or ceiling and put it in the region of the outlet on the wall.
When connecting an Internet outlet, it is extremely important to perform the correct pinout. In the diagram on the left, two different color options for bridging the outlet with clamping contacts are indicated in different colors. On the right diagram, fixing is done with knife mechanisms
Features cable pinout RJ-45
Before connecting to an Internet outlet, you need to clearly know and understand where and what color to mount each individual twisted pair wiring. To do this, you need to know the crimping scheme and the rules for crimping RJ-45 cables with your own hands.
There are two main types of RJ-45 wire pinouts: straight and cross. The first type of cable is used to connect end devices (computer / PC, smart TV / Smart TV, switch / Switch) to the so-called router (Router).
The second type of cable is used to connect devices similar in function (computer - computer, router - router, switch - switch) with each other.
For a direct scheme, the color matches the color in this order: white-orange, orange, white-green, blue, white-blue, green, white-brown, brown. For the cross everything is the same, but the green ones change places with the orange ones, respectively
Preliminarily, we leave about 100-150 mm from the wall plane along the cable length, and cut off the rest of the cable. This length will be enough for possible subsequent remounting of wiring.
Before starting electrical work, you can familiarize yourself with twisted-pair crimping schemes for 8 and 4 cores, discussed in our other article.
Now you need to free 4 pairs of wires from the outer shell and from the foil (it acts as a protective shielding) if any.
There is also a special thread inside the twisted pair with which you can easily release all the necessary wiring. You can also use a regular knife or a special cutting surface, which is equipped with almost all crimping pliers.
Crimping pliers will help to easily mount any connector of the RJ-45 and RJ-11 format, the main thing to remember is if the tool itself does not compress the wires, then you can squeeze it with a knife or a thin screwdriver
At the next stage, we rectify all twisted pairs of multi-colored wires and carefully “plant” each individual color in its own niche according to the color pinout in the terminal block of the socket.
This must be done in such a way that the rest of the “untouched” insulation wire falls under the terminal block clamp. Now we twist the fixing bolts with a screwdriver on the terminal strip and simultaneously press the remaining wiring so that they do not leave their seats.
In conclusion, with a “sense of strength”, we press down the screw connectors on the terminal block with a screwdriver and fix each core in the terminal group separately, while cutting through the braid of small wires. After we trim the leftovers. Wiring should be all at the same height from the base of the terminal block.
You may also find useful information on how to build a twisted pair cable.
Checking Wiring Signals
Separately, it is worth mentioning the possibility of checking the availability, and most importantly, the correctness of the signals passing through 8 wires of a twisted pair cable. This can be done using a conventional electrical tester.
But first, you need a patch cord (ready-to-use wires at both ends of which are mounted, again in a direct pinout diagram, RJ-45 format connectors) and a second unmounted Internet outlet or keystone.
You can buy an ordinary patch cord either in the store or you can do it yourself (connectors in a direct pinout scheme). The length of patch cords of standard length is in the range from 0.3 m to 5 m
Pre-mount the second end of the laid wire in an unmounted outlet / keystone, into which we insert one end of the patch cord.
We switch the tester to the sound signal mode and compare the corresponding connector channels on the patch cord and in the Internet outlet. We get a sound signal that indicates the presence of a connection.
Not every electric tester has a beep mode. Therefore, for verification, you can go into resistance mode and follow the data on the digital panel
There is also the option of checking signals with the help of special cable testers, but for this you need one more patch cord ready and working according to the direct scheme. We insert one end of each patch into sockets (new and temporary), the other two are inserted into the cable tester.
Light and sound accompaniment on the tester panel indicates the presence or absence of a signal on a particular twisted pair core. We look and check the signal.
Some cable testers, in addition to checking for signal presence, provide information on the category of cable. This feature is quite useful for certification of premises.
Ideally, we will receive 8 light and sound signals in a cable tester in sequence. In these two ways, you can verify the correct pinout and the presence of a full-fledged signal for transmitting data through a twisted pair cable.
Terminal strip installation and mounting
After checking the signals, we proceed to the final part of the installation of the Internet outlet.
To do this, carefully hide the rest of the wires and return the terminal block with the cores connected back to the socket, pull the fixing bolts to the mounted “glass”.
The terminal block must “sit” tightly in the socket, there should be no protruding and bent wires.
If the terminal block does not sit in the recess of the wall, then you can cut the back of the mounting “glass”. Usually, when landing, the terminal block is missing some pairs of mm
Once again, we check the connection, for this we connect a device, for example, a laptop, and see if it detects a connected local network or the Internet.
If there is no connection on the device, we return to the pinout point and again check the correctness of the actions performed, as well as the quality of the crimping. It often happens that one of the cables is trite in the terminal block. To do this, you just need to tighten the core clamp more tightly.
After an additional check of the network’s operability, we cut off all the remains of the protruding veins and proceed to mount the lining. The cover plate is usually equipped with several plastic latches.
It is enough to accurately place it on the socket and press until you hear a click sound. That's it, the Internet outlet is installed and ready for use.
If the signal does not pass when checking the connection, you need to check the quality of the contact. It is possible that he is just weakly clamped
A similar instruction can be used to connect and install any kind of Internet outlets:
They may differ in the location of contact groups and a set of interfaces, in the way of mounting, but this does not change the essence of the matter:
Do-it-yourself connection of single or modular Internet outlets is available to any home master, not to mention IT engineers. The main thing is to “guess” the first time with a color pinout of the cores and get a high-quality data signal through a twisted pair cable.
Have you repeatedly performed electrical work and can supplement the information in our article with practical recommendations? Or did you install such a socket with your own hands and faced an interesting moment that we did not mention here? Please share your tips with our readers - leave comments under this article.